Spring End Grinding Machine - CRUSH GRINDER

Description : In this process the distance between the two grinding wheels is pre-set. The springs are then fed through the loading plate between the grinding wheels, removing the excess material to the desired length. In case desired ground length is not achieved in single pass then spring needs to pass multiple times to get desired result. spring passes

Features:

  • Variable speed setting for loading/ carrier plate for optimized production.
  • Sturdy dressing attachment.
  • Grinding wheel selection subject to spring specification.
  • Easy changeover of Grinding Wheels.

Federmaschinen

Model SEG 1

Model SEG 1
Wire Diameter 0.3mm to 1mm in single pass
And up to 3mm in multiple pass
Drahtbiegemaschinen

Model SEG 3

Model SEG 3
Wire Diameter 1mm to 2.5mm in single pass and up to 5mm in multiple pass